Home

About Us

Services

Management

Gallery

Contact

 

 

Impulse Voltage Test System 15kJ 300kV

   
 

 

Reception of Impulse Generator

   
 

Please click the images for larger view.

   
   
  List of Equipments and their uses.
   
 

Item

Equipment Description

Uses

1

Infrared Camera: Therma cam P65: Make: Flir System
Therma cam Reporter 7.0 professional and software

Infrared diagnosis of equipment to locate hot spots and temperature rise. Thus minimizing the risk of failure and to plan a state oriented maintenance

2

SF6 Gas leak detector 3-033-R002

SF6 Volume % Measurement

For the detection of decomposition products sulphur dioxide SO2 and hydrogen fluoride HF being caused by electric arcs in SF6-gas/ existing oil moist can be determined as well

3 Secondary Injection Tester

Type PTE 100C

For secondary testing of protective relay equipment such as:
Overcurrent relays, inverse time overcurrent relays, undercurrent relays, ground fault relays, directional overcurrent relays, directional ground fault relays, overvoltage relays, undervoltage relays, directional voltage relays, directional power relays, power factor relays, differential protection (differential circuits), distance protection equipment (phase by phase), negative sequence overcurrent relays, motor overload protection, automatic reclosing devices, tripping relays, voltage regulating relays, over impedance relays, Z >, under impedance relays, Z, Thermal relays, time-delay relays.

4 Primary Current Tester


Type LET –1000-RD

For primary injection testing of protective relay equipment and circuit breakers. It is also used to test the transformation ratio of current transformers and other applications that require high variable currents.
Specific applications: circuit breaker testing, testing current transformers, polarity testing, heat runs, automatic reclosers and sectionalizers, testing integrity of ground grids and safety-ground devices.

5 Digital Multimeter
Type Fluke175
Measurement or Testing for the following; AC/DC voltage and current, Resistance frequency temperature diodes, continuity, capacitance
6 Current Clamp (i400)
Type Fluke AC400A
Measurement for AC current and input impedance of <10W
7 Temperature Probe
Type Fluke 80T-150U
Measurement temperature of air, surface and non-corrosive liquid.
8 Digital Multimeter Type Fluke FL 87-5

Measurement or Testing for the following; AC/DC voltage and current, resistance, frequency, temperature, diodes, capacitance and continuity.

9 AC/DC Clamp
Type Fluke LEM LH 2040

Measurement or testing for the following: AC/DC voltage and current, Resistance, Diode.

10 Digital Multimeter
Type Fluke FL187

Measurement or Testing for the following; AC/DC voltage and current, resistance, frequency, temperature, conductance.

11 Insulation tester
Type METRISO 5000A from GMC

This instrument is suited for non-destructive measurement of insulation resistance in electrical systems, at machines and transformers and in cables, as well as within the electrical equipment of locomotives, tram systems and ocean going vessels, with eight selectable test voltages up to 5kV.